Nutone VSUC4SK Bedienungsanleitung PDF herunterladen (Seite 4)

Monitor Controls

ON / OFF Button

The pushbutton control switch for this on / off is located on the

bottom left on the front of the VSUC4 Monitor Station. This

control switch button is pressed in momentarily to power the

onitor or if power exists to monitor, press button momentarily

to turn off.

Telephone Number Keypad

The sequence of keypad numbers layout is the same as all

current telephone keypads. 0 – 9, the asterisk star and pound

key are the numerical and symbol button keys. Redial button

and Tel button are just to the right of the keypad. The “Tel

Button” activates and makes audible the telephone circuitry

or if pressed while active, hangs up the line.

LCD Display

The LCD displays the time, AM or PM, the active camera –

CA-1 or CA-2, the word camera displays and will flash

indicating another door call from the other camera has been

initiated. It also is the viewing point for the TV or radio set up

information, timer alarm, radio channels, TV channels, and the

active mode (ie: TV, FM, AM).

Volume Up / Down Buttons

There are two buttons to control the volume. One with the

arrow pointing up is for increasing the volume. One with arrow

pointing down is for decreasing the volume. A different volume

setting can be set for each mode of operation.

Other uses for the volume controls while in the set mode is for

setting the time, as it is used to toggle between the hour and

minutes during their setting use, setting the alarm timer, and

selecting the cable mode.

TV Button

The TV button activation turns on the TV tuner mode and

provides the last TV station viewed on the monitor.

Screen Button

The “Screen Button” toggles the monitor’s picture from regular

size (4:3 aspect ratio) to widescreen (16:9 aspect ratio).

Door Button

The “Door Button” is used to turn on and turn off the camera’s

and display them on the monitor either when answering the

door signal or just to monitor the camera location.

Record Button

The “Record Button” is used to record up to a 60 second

message or stop a message recording.

Play Button

The “Play Button” is used to play back the recorded message

or stop the recorded message being played.

FM / AM Mode Button

The “FM / AM Button” activation turns on the radio tuner mode

and provides the last radio mode (FM or AM) and station the

monitor was tuned. Toggling between the two modes is

accomplished with this button.

eek Up / Down Buttons

There are two buttons to control the “Seek” function for the

radio. One with the arrow pointing up is for stepping through the

stations incrementally. One with arrow pointing down is for

tepping through the radio stations in descending order.

Priority Call / Set Button

The priority call / set button is used to initiate the program mode

for the monitor’s time, timer, TV Mode used and return to clock

et. In intercom mode, this button is used together with the door

button to disable the microphone at the camera(s).

Channel Up / Down Buttons

There are two buttons to control the channel selection. One with

the arrow pointing up is for incremental stepping the channel

selection. One with arrow pointing down is for stepping through

the channel selection in descending order.

Other uses for the channel buttons while in the set mode is for

setting the time, as it is used to toggle between the hour and

minutes during their setting use, setting the alarm timer, and

selecting the cable mode.

View Monitor Side Controls

There are three (3) ThumbWheels/Switches on the right side of

the viewing screen. From the top is the contrast, for adjusting

the contrast setting of the screen image to the desired level.

The middle switch is the color control, for adjusting the color of

the screen image to the desired level. The bottom switch is the

Brightness control, for adjusting the brightness of the screen

image to the desired level.

Monitor Operation

Setting the Clock

• The clock is set with the unit being turned off.

* Press the “Priority Call / Set Button” and cause the

minutes to flash on the LCD screen

Press the “Channel up / down buttons” to obtain the

current minutes past the hour at that time

• Press the “volume up / down buttons” to switch to the hours

* Press the “Channel up / down buttons” to obtain the

current hour at that time

Setting the Timer / Alarm

The timer is set with the unit being turned off.

• Press the “Priority Call / Set Button” two (2) times and cause

ST to flash and four dashes appear where the time digits

would be on the LCD screen

•

Press the “Volume up button” to switch to the alarm set

mode. Required only for the first setting, otherwise the

minutes field will flash.

* The minutes field will be flashing and to set the minutes,

Press the “Channel up / down buttons” to obtain the

current minutes desired for the alarm time

• Press the “Volume down button” to switch to the hours alarm

set mode

The hours field will be flashing and to set the alarm hour

Press the “Channel up / down buttons” to obtain the

current hour desired for the alarm time

1 2 3 4 5 6 7 8 9 ... 15 16

Kommentare zu diesen Handbüchern

Keine Kommentare

Nutone VSUC4SK Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern